Abasi, Marzeyeh
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018, Pages 50-62]
Adeli, Kamran
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018, Pages 50-62]
Afraz, Seddigheh
Extraction and Identification of Chemical Composition within Acetone Extract of Taxus baccata L. Bark [Volume 33, Issue 1, 2018, Pages 88-99]
Afsooni, Fatemeh
Use of unconventional water (rain) in urea-formaldehyde adhesive (Arian sina company case study) [Volume 33, Issue 2, 2018, Pages 270-279]
Ahmadi ladjimi, Ali
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018, Pages 256-269]
Ahmad Zadeh, Masoud
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018, Pages 122-132]
Akbari, Moghadaseh
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018, Pages 323-336]
Aryaie Monfared, Mohammad Hadi
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2019, Pages 544-552]
Asadi Malek Jahan, Faraz
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018, Pages 369-380]
Asadpour, Ghasem
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018, Pages 381-390]
Asadpour, Ghasem
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018, Pages 428-437]
Ashori, Alireza
Chemical modification of cellulose nanofibers with phthalimide air filter to adsorb carbon dioxide [Volume 33, Issue 4, 2019, Pages 531-543]
Ashtari, Hadi
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018, Pages 438-452]
Azadfallah, Mohammad
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018, Pages 76-87]
Azadfallah, Mohammad
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018, Pages 280-289]
Azadfallah, Mohammad
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018, Pages 256-269]
Azizi, Jafar
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018, Pages 231-243]
Azizi. Mossello, Ahmad
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2019, Pages 593-605]
B
Bakhshi, Mohammad
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018, Pages 244-255]
Bastani, Saeed
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018, Pages 76-87]
Baziyar, Behzad
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018, Pages 453-465]
Behnam, Behzad
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Boroshkian, Hadi
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018, Pages 381-390]
Borzacchiello, Assunta
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018, Pages 300-310]
D
Dashti, Parvin
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018, Pages 50-62]
Dastoorian, Foroogh
Effect of thermal modification on chemical and physical properties of Iranian Beech (Fagus orientalis) and Velvet Maple (Acer Velutinum) [Volume 33, Issue 1, 2018, Pages 142-154]
Davodi, Niloufar
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2019, Pages 553-563]
Davodian, Hasan
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018, Pages 428-437]
Dehghani Firoz Abadi, Mohammad reza
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018, Pages 323-336]
E
Ebrahimi, Marjan
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018, Pages 417-427]
Ebrahimpour Kasmani, Jafar
The effect of using cellulosic Nanofiber and imported chemical pulp and paper on durable paper made of below comb fibers [Volume 33, Issue 3, 2018, Pages 337-346]
Einollahi, yashar
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018, Pages 369-380]
F
Faezipour, Mohammad Mehdi
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018, Pages 300-310]
Faraji, Farshid
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018, Pages 391-401]
Farhadi, Faezeh
Effect of thermal modification on chemical and physical properties of Iranian Beech (Fagus orientalis) and Velvet Maple (Acer Velutinum) [Volume 33, Issue 1, 2018, Pages 142-154]
G
Ghasemi, Behzad
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018, Pages 391-401]
Ghorbani, Maryam
The usage effect of nano-alumina on the mechanical and surface properties of HDF made of oxidized fibers [Volume 33, Issue 2, 2018, Pages 196-204]
Golbabaei, Fardad
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018, Pages 402-416]
Goli, Mojtaba
Determination the opti mum pulping and bleaching conditions for some forest species and evaluation its papers [Volume 33, Issue 1, 2018, Pages 38-49]
H
Haamedi, Sepideh
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2019, Pages 553-563]
Habibi, Masoudreza
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018, Pages 63-75]
Hajihassani, Reza
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018, Pages 402-416]
Hamzeh, Yahya
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018, Pages 256-269]
Hamzeh, Yahya
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018, Pages 438-452]
Hasanpoor tichi, Ali
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018, Pages 453-465]
Hassani khorshidi, fatemeh
An Investigation into the Effect of Moisture Content on Adhesion strength of Half-polyester and Polyurethane Clear Paints Applied to Wood Surface [Volume 33, Issue 4, 2019, Pages 511-521]
Hedjazi, Sahab
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018, Pages 391-401]
Hoseinzadeh, Fahimeh
Effect of thermal modification on chemical and physical properties of Iranian Beech (Fagus orientalis) and Velvet Maple (Acer Velutinum) [Volume 33, Issue 1, 2018, Pages 142-154]
Hossein, Kermanian
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018, Pages 25-37]
Hosseinihashemi, Seyyed Khalil
Extraction and Identification of Chemical Composition within Acetone Extract of Taxus baccata L. Bark [Volume 33, Issue 1, 2018, Pages 88-99]
Hosseinzadeh, Omid
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2019, Pages 522-530]
I
Ibaghi esfahani, Hamid
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018, Pages 218-230]
J
Jahanlatibari, Ahmad
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Jahan latibari, Ahmad
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018, Pages 359-369]
Jalali tarshizy, Hossein
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018, Pages 311-322]
Jalalitorshizi, Hosein
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018, Pages 12-24]
Jalali Torshizi, Hossein
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018, Pages 347-358]
Jonobi, Mehdi
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018, Pages 122-132]
Jonobi, Mehdi
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018, Pages 300-310]
Jonoobi, Mehdi
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018, Pages 438-452]
Jonoobi, Mehdi
Chemical modification of cellulose nanofibers with phthalimide air filter to adsorb carbon dioxide [Volume 33, Issue 4, 2019, Pages 531-543]
K
Kargarfard, Abolfazl
The Investigation of Physical and Mechanical Properties of Oriented Strand Board (OSB) Production Using Corn Stalks Residues [Volume 33, Issue 2, 2018, Pages 155-165]
Kazemi Tabrizi, Ali
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018, Pages 369-380]
Keshaavarz, Ashkaan
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018, Pages 347-358]
Khojasteh Khosro, Saeed
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018, Pages 166-178]
Kiani, Hamedeh
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2019, Pages 579-592]
Kohantorabi, Mostafa
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Koosha, Mojtaba
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018, Pages 347-358]
M
Madhoushi, Mehrab
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018, Pages 112-121]
Mahdavi, Saeed
Determination the opti mum pulping and bleaching conditions for some forest species and evaluation its papers [Volume 33, Issue 1, 2018, Pages 38-49]
Mamizadeh, Yaghob
The effect of using cellulosic Nanofiber and imported chemical pulp and paper on durable paper made of below comb fibers [Volume 33, Issue 3, 2018, Pages 337-346]
Manouchehri, Negin
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Masteri Farahani, Mohammadreza
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018, Pages 112-121]
Mohamadkazemi, Faranak
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018, Pages 347-358]
Mohammad Moradi, Zahra
Identification and Prioritization of factors affecting competitiveness of Classic Furniture by using ANP (Case study: Tehran Province) [Volume 33, Issue 2, 2018, Pages 179-195]
Mohebalian, Abdolrahim
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018, Pages 359-369]
Mojerian Galogahi, Vajihe
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018, Pages 112-121]
Motie, Nazanin
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018, Pages 300-310]
N
Narooei, saeed
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2019, Pages 564-578]
Nazarnezhad, Noraldin
The usage effect of nano-alumina on the mechanical and surface properties of HDF made of oxidized fibers [Volume 33, Issue 2, 2018, Pages 196-204]
Nazarnezhad, nouredin
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2019, Pages 489-500]
Nikkhah Dafchahi, Mostafa
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018, Pages 290-299]
O
Oladi, Reza
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018, Pages 417-427]
P
Partovinia, Ali
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018, Pages 311-322]
Pourmosa, Shadman
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018, Pages 359-369]
R
Rafieian, Fatemeh
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018, Pages 122-132]
Rahmaninia, Mehdi
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018, Pages 256-269]
Ramezani, Omid
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2019, Pages 553-563]
Rasooly, Esmaeel
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018, Pages 231-243]
Rasooly Garmaroody, Esmaeil
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2019, Pages 553-563]
Resalati, Hosein
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2019, Pages 579-592]
Resalati, Hossein
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018, Pages 290-299]
Resalati, Hossein
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018, Pages 323-336]
Resalaty, Hossein
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018, Pages 381-390]
Rezayati Charani, Pejman
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2019, Pages 593-605]
Rodi, Hamid reza
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018, Pages 12-24]
Rodi, Hamid reza
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018, Pages 25-37]
Roohnia, Mehran
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Rouhbakhsh Bidaei, Mahmoud
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018, Pages 280-289]
Rudi, Hamidreza
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018, Pages 231-243]
Rudi, Hamidreza
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018, Pages 311-322]
S
Sadatnia, Mohamad ali
Comparison of stiffness parameters of two kinds of date palm using nondestructive test [Volume 33, Issue 1, 2018, Pages 133-141]
Saeedi, Haseibeh
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018, Pages 25-37]
Safizadeh, Ali
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018, Pages 311-322]
Salehi, Kamyar
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018, Pages 402-416]
Salehpour, Shoboo
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018, Pages 122-132]
Saraeyan, Ahmad reza
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018, Pages 323-336]
Sepahvand, Sima
Chemical modification of cellulose nanofibers with phthalimide air filter to adsorb carbon dioxide [Volume 33, Issue 4, 2019, Pages 531-543]
Shabanpour, Saeb
The usage effect of nano-alumina on the mechanical and surface properties of HDF made of oxidized fibers [Volume 33, Issue 2, 2018, Pages 196-204]
Sharifi, Seyed Hassan
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2019, Pages 489-500]
Sharifi, Seyed Hassan
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2019, Pages 579-592]
Soleymanisadati, Ali
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018, Pages 12-24]
Sukhtesaraie, Alireza
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018, Pages 76-87]
T
Taghipour Javy, Masoud
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018, Pages 166-178]
Tajdini, Ajang
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Tajdini, Ajang
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018, Pages 359-369]
Talaei, Aisona
Thermal analysis by TGA and DTA method of wood-polymer of furfurylated beech and fir wood [Volume 33, Issue 4, 2019, Pages 501-510]
Tarmian, Asghar
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018, Pages 417-427]
V
Vaysi, Ramin
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018, Pages 1-11]
Y
Yarahmadi, Rasoul
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018, Pages 280-289]
Yousefi, Farzad
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018, Pages 1-11]
Yousefzadeh, Maryam
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018, Pages 438-452]
Z
Zabizadeh, Seyed majid
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018, Pages 428-437]
Zamani, Zahar
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018, Pages 50-62]
Zare, Abbas
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018, Pages 244-255]
Zare, Abbas
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2019, Pages 478-488]
Zarrinmehr, Jamshid
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Zeinaly, Farhad
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018, Pages 369-380]